3D Bioplotter Research Papers

To study cell responses, polymeric scaffolds with a controllable pore size and porosity have been fabricated using rapid-prototyping methods. However, the scaffolds fabricated by rapid prototyping have very smooth surfaces, which tend to discourage initial cell attachment. Initial cell attachment, migration, differentiation and proliferation are strongly dependent on the chemical and physical characteristics of the scaffold surface. In this study, we propose a three-dimensional (3D) plotting method supplemented with a chemical blowing agent to produce a surface-modified 3D scaffold in which the surface is inscribed with nano- and micro-sized pores. The chemically-blown 3D polymeric scaffold exhibited positive qualities, including the…

Designing a three-dimensional (3-D) ideal scaffold has been one of the main goals in biomaterials and tissue engineering, and various mechanical techniques have been applied to fabricate biomedical scaffolds used for soft and hard tissue regeneration. Scaffolds should be biodegradable and biocompatible, provide temporary support for cell growth to allow cell adhesion, and consist of a defined structure that can be formed into customized shapes by a computer-aided design system. This versatility in preparing scaffolds gives us the opportunity to use rapid prototyping devices to fabricate polymeric scaffolds. In this study, we fabricated polycaprolactone scaffolds with interconnecting pores using a…

Various mechanical techniques have been used to fabricate biomedical scaffolds, including rapid prototyping (RP) devices that operate from CAD files of the target feature information. The three-dimensional (3-D) bio-plotter is one RP system that can produce design-based scaffolds with good mechanical properties for mimicking cartilage and bones. However, the scaffolds fabricated by RP have very smooth surfaces, which tend to discourage initial cell attachment. Initial cell attachment, migration, differentiation and proliferation are strongly dependent on the chemical and physical characteristics of the scaffold surface. In this study, we propose a new 3-D plotting method supplemented with a piezoelectric system for…

An ideal scaffold should have good mechanical properties and provide a biologically functional implant site. A rapid prototyping system has been introduced as a good method of fabricating 3D scaffolds that mimic the structure in the human body. However, the scaffolds have strands that are too smooth and a pore size that is too large relative to the seeded cells and present unfavorable conditions for initial cell attachment. To overcome these problems, we propose a hybrid technology combining a 3D rapid prototyping system and an electrospinning process to produce a hierarchical 3D biomedical scaffold. The resulting structure consists of alternating…