3D Bioplotter Research Papers
Hierarchically porous calcium phosphate scaffold with degradable PLGA microsphere network
Calcium phosphate cement (CPC) is widely used in orthopedics, dentistry and spine surgery because of its excellent biocompatibility, osteoconductivity, arbitrary shaping and self-setting ability. However, slow degradation rate of CPC decreases its bone regeneration efficacy. Herein, poly (lactic co-glycolic acid) microspheres (PLGAm) and wollastonite (WS) were mixed with CPC powder to prepare CPC composite pastes, and then the composite pastes were perfused into poly (lactic co-glycolic acid) network (PLGAnw) to construct composite bone repair materials. The degradation of PLGAnw generated interconnected macropores with the short side of about 468 μm along horizontal axis and the long side of about 785…
Preparation and Properties of Self-Setting Calcium Phosphate Scaffolds: Effect of Pore Architecture
Self-setting calcium phosphate cement (CPC) scaffold with interconnected macropores is hard to prepare without compromising its hydration reaction. Herein, an indirect 3D printing method is using to prepare CPC scaffolds. Detailedly, polycaprolactone (PCL)-sacrificed models with different strut sizes are first printed by 3D plotting technique, and then the CPC pastes are perfused into the PCL models and then self-setting. After the removal of the PCL models, the CPC scaffolds with different pore sizes are obtained. It is showed in the results that the prepared CPC scaffolds had uniform shape and 3D interconnected macropore structure. Meanwhile, the compressive strength of CPC…
Novel Strategy to Accelerate Bone Regeneration of Calcium Phosphate Cement by Incorporating 3D Plotted Poly(lactic‐co‐glycolic acid) Network and Bioactive Wollastonite
Inefficient bone regeneration of self‐hardening calcium phosphate cement (CPC) increases the demand for interconnected macropores and osteogenesis‐stimulated substances. It remains a challenge to fabricate porous CPC with interconnected macropores while maintaining its advantages, such as plasticity. Herein, pastes containing CPC and wollastonite (WS) are infiltrated into a 3D plotted poly(lactic‐co‐glycolic acid) (PLGA) network to fabricate plastic CPC‐based composite cement (PLGA/WS/CPC). The PLGA/WS/CPC recovers the plasticity of CPC after being heated above the glass transition temperature of PLGA. The presence of the 3D PLGA network significantly increases the flexibility of CPC in prophase and generates 3D interconnected macropores in situ upon…