™
3D Bioplotter Research Papers
Biofabrication of HepG2 Cells-Laden 3D Structures Using Nanocellulose-Reinforced Gelatin-Based Hydrogel Bioinks: Materials Characterization, Cell Viability Assessment, and Metabolomic Analysis
The successful replication of the intricate architecture of human tissues remains a major challenge in the biomedical area. Three-dimensional (3D) bioprinting has emerged as a promising approach for the biofabrication of living tissue analogues, taking advantage of the use of adequate bioinks and printing methodologies. Here, a hydrogel bioink based on gelatin (Gel) and nanofibrillated cellulose (NFC), cross-linked with genipin, was developed for the 3D extrusion-based bioprinting of hepatocarcinoma cells (HepG2). This formulation combines the biological characteristics of Gel with the exceptional mechanical and rheological attributes of NFC. Gel/NFC ink formulations with different Gel/NFC mass compositions, viz., 90:10, 80:20, 70:30,…
Nanocomposite hydrogel-based bioinks composed of a fucose-rich polysaccharide and nanocellulose fibers for 3D-bioprinting applications
Hydrogels are the most common type of bioinks, yet, finding adequate biomaterials to develop suitable bioinks for 3D bioprinting remains challenging. Herein, innovative hydrogel bioinks were developed by combining nanofibrillated cellulose (NFC) with a fucose-rich polysaccharide, FucoPol (FP), still unexplored for 3D bioprinting. NFC/FP bioinks with different mass proportions, namely 1:1, 2:1, 3:1 and 4:1, were prepared and denominated as NFC1FP, NFC2FP, NFC3FP and NFC4FP. A formulation without NFC was also prepared for comparison purposes (NFC0FP). The rheological properties of the bioinks were enhanced by the addition of NFC, as evidenced by the increase in shear viscosity from 1.39 ± 0.03 Pa s (NFC0FP)…
All-Cellulose Hydrogel-Based Bioinks for the Versatile 3D Bioprinting of Different Cell Lines
The development of bioink formulations with suitable properties is fundamental for the progress of 3D bioprinting. The potential of cellulose, the most abundant biopolymer, in this realm has often been underestimated, relegating it essentially to a reinforcement additive of bioinks. In this work, cell-laden bioink formulations, composed exclusively of cellulose, viz., “all-cellulose bioinks”, were developed by combining carboxymethyl cellulose (CMC) and nanofibrillated cellulose (NFC) in different mass proportions (90/10, 80/20, and 70/30%). The incorporation of NFC increases the printability of the inks (from Pr = 0.7 to 0.9) while maintaining their shear-thinning behavior, and increasing contents of NFC also decrease…
Nanofibrillated cellulose/gellan gum hydrogel-based bioinks for 3D bioprinting of skin cells
The development of suitable bioinks is an important research topic in the field of three-dimensional (3D) bioprinting. Herein, novel hydrogel-based bioinks composed of nanofibrillated cellulose (NFC) and gellan gum (GG) in different NFC/GG mass proportions (90:10, 80:20, 70:30, and 60:40) were developed and characterized. The increase in the content of GG, as well as its combination with NFC, enhanced their rheological properties, increasing both storage (G’) and loss (G”) moduli and the G’ recovery capacity of the hydrogels (from 70.05 ± 3.06 % (90:10) to 82.63 ± 1.21 % (60:40)), as well as their mechanical properties, increasing the compressive stiffness…
Hydrogel Bioinks of Alginate and Curcumin-Loaded Cellulose Ester-Based Particles for the Biofabrication of Drug-Releasing Living Tissue Analogs
3D bioprinting is a versatile technique that allows the fabrication of living tissue analogs through the layer-by-layer deposition of cell-laden biomaterials, viz. bioinks. In this work, composite alginate hydrogel-based bioinks reinforced with curcumin-loaded particles of cellulose esters (CEpCUR) and laden with human keratinocytes (HaCaT) are developed. The addition of the CEpCUR particles, with sizes of 740 ± 147 nm, improves the rheological properties of the inks, increasing their shear stress and viscosity, while preserving the recovery rate and the mechanical and viscoelastic properties of the resulting fully cross-linked hydrogels. Moreover, the presence of these particles reduces the degradation rate of…
Freeform 3D printing using a continuous viscoelastic supporting matrix
Embedded bio-printing has fostered significant advances toward the fabrication of soft complex tissue-like constructs, by providing a physical support that allows the freeform shape maintenance within the prescribed spatial arrangement, even under gravity force. Current supporting materials still present major drawbacks for up-scaling embedded 3D bio-printing technology towards tissue-like constructs with clinically relevant dimensions. Herein, we report a a cost-effective and widely available supporting material for embedded bio-printing consisting on a continuous pseudo-plastic matrix of xanthan-gum (XG). This natural polisaccharide exhibits peculiar rheological properties that have enabled the rapid generation of complex volumetric 3D constructs with out-of-plane features. The freedom…