3D Bioplotter Research Papers

Flexible electrodes are crucial for the widespread application of flexible electronics. Flexible stretchable electrodes are a research hotspot for finding a solution for the inability of flexible electrodes to withstand large deformations. In this study, the suitability of silicone rubber (Ecoflex), carbon nanotube (CNT), and carbon fiber (CF) composite materials for flexible devices and their ratios were evaluated for the first time. 3D-printed electrodes based on fractal structures with tensile insensitivity and high linearity were prepared to achieve integrated stretching of flexible devices. To demonstrate the benefits and impact of fractal structures on electrode performance, we fabricated flexible stretchable electrodes…

Ureteral stents are commonly used in clinical treatment of ureteral diseases. There were a series of complications, such as biofilms and crusts caused by bacteria after surgery. Therefore, biodegradable with bacteriostatic ureteral scaffolds would be the potential to solve above mentioned problems. In this study, nanosilver (AgNP) was added to the polylactic-co-glycolic acid (PLGA) and polycaprolactone (PCL) to prepare biodegradable antibacterial ureteral scaffold samples by 3D printing. The biocompatibility, antibacterial properties, degradability, and mechanical properties of samples were observed. The samples were under a strong inhibitory effect on both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and the…

Aerogels were listed among the top ten emerging technologies in chemistry by IUPAC in 2022. Their record-breaking properties sparked the emergence of a thriving insulation market, but solutions are sought to promote additional applications. A 3D assembly process based on direct ink writing of “aerogel-in-aerogel” nanocomposites is presented. The printed polyimide-silica aerogels are non-brittle (E = 6.7 MPa) with a super-insulating thermal conductivity (20.3 mW m−1 K−1) and high thermal stability (T5wt% 447 °C). In addition, they display excellent low-loss dielectric properties and microwave transmission over all relevant communication bands and can be functionalized for electromagnetic interference (EMI) shielding. The high shape-fidelity printing, combined…

Impedance-matched acoustic materials were developed to improve ultrasound penetration through the aberration layer. The traditional ultrasound layer matching material is called a couplant, which can only enhance ultrasound transmission to soft biological media such as the cartilage and muscle but cannot penetrate hard media such as the bone. Here, we propose a phase-modulated complementary acoustic metamaterial based on the principle of impedance matching, which enables ultrasound to penetrate the bone, and use the equivalent parameter technology of acoustic metamaterials for parameter design. Ultrasonic layer adjustment is performed through 3D printing and corrects bone aberrations. Several configurations were investigated through numerical…

Protein delivery and release from synthetic scaffold materials are major challenges within the field of bone tissue engineering. In this study, 13-93B1.5 borosilicate bioactive glass (BSG) base paste was 3D printed to produce BSG-based scaffolds with high porosity (59.85 ± 6.04%) and large pore sizes (350–400 μm) for functionalization with a sodium alginate (SA)/calcitonin gene-related peptide (CGRP) hydrogel mixture. SA/CGRP hydrogel was uniformly filled into the interconnected pores of 3D printed BSG constructs to produce BSG-SA/CGRP scaffolds which were subject to bioactivity and biocompatibility analysis. BSG scaffolds filled with SA hydrogel underwent dissolution in simulated body fluid (SBF), resulting in…

Repair of large bone defects represents a major challenge for orthopedic surgeons. The newly formed microvessels inside grafts play a crucial role in successful bone tissue engineering. Previously, an active role for mesenchymal stem cell (MSC)-derived exosomes in blood vessel development and progression was suggested in the repair of multiple tissues. However, the reports on the application of MSC-derived exosomes in the repair of large bone defects are sparse. In this study, we encapsulated umbilical MSC-derived exosomes (uMSCEXOs) in hyaluronic acid hydrogel (HA-Gel) and combined them with customized nanohydroxyapatite/poly-ε-caprolactone (nHP) scaffolds to repair cranial defects in rats. Imaging and histological…

Critical oral-maxillofacial bone defects, damaged by trauma and tumors, not only affect the physiological functions and mental health of patients but are also highly challenging to reconstruct. Personalized biomaterials customized by 3D printing technology have the potential to match oral-maxillofacial bone repair and regeneration requirements. Laponite (LAP) nanosilicates have been added to biomaterials to achieve biofunctional modification owing to their excellent biocompatibility and bioactivity. Herein, porous nanosilicate-functionalized polycaprolactone (PCL/LAP) was fabricated by 3D printing technology, and its bioactivities in bone regeneration were investigated in vitro and in vivo. In vitro experiments demonstrated that PCL/LAP exhibited good cytocompatibility and enhanced the…

Calcium silicate (CS) composite bone tissue engineering scaffolds were three-dimensionally printed using titanium metallic powders as the second strengthening phase for overcoming the inherent brittleness and fast degradability. In order to promote the sintering process of all composite scaffolds, mesoporous structure was further introduced into sol-gel-derived CS powders obtaining mesoporous CS (MCS) with larger surface area. The influences of mesoporous structure, sintering temperature and Ti content have been investigated through comparisons of the final scaffold composition, microstructure, compressive strength and in vitro stability. Results showed that CS matrix materials reacted with Ti could form less degradable CaTiO3 and TiC ceramic…

Simple ternary SiO2CaOP2O5 bioglasses proved sufficient osteogenesis capacity. In this study, the bioglasses were 3D printed into porous scaffolds and SiO2/CaO molar ratio was altered (from 90/5 to 60/35) to achieve tunable glass-ceramic compositions after thermal treatment. Scaffolds possessed interconnected porous structure with controllable porosities via 3D printing technique. In addition, microstructure and properties of mechanical strength, degradation, ion dissolution and apatite formation were investigated. Characterization results showed that higher content of SiO2 produced more homogeneous crystalline particles and sintering compactness, thus led to higher strength. For scaffolds with higher CaO content, more glasses were maintained and faster degradation rate…

In the present work, dissolved cellulose has been 3D bioprinted to produce complex structures with ordered interconnected pores. The process consists of the dissolution of dissolving pulps in N-methylmorpholine-N-oxide (NMMO), multilayered dispensing, water removal of NMMO and freeze-drying. 3D bioprinting of cellulose/NMMO solution at 70 ℃ was analogous to that of thermoplastics by the process of melting and solidification to produce cellulose/NMMO objects in the solid form. However, 3D bioprinting of cellulose/NMMO solution at a higher temperature than 70 ℃ produced cellulose/NMMO objects in the gel form. Cellulose was regenerated by water; thereafter, freeze-drying treatment maintained the 3D bioprinted structures…