3D Bioplotter Research Papers

A direct and comprehensive comparative study on different 3D printing modalities was performed. We employed two representative 3D printing modalities, laser- and extrusion-based, which are currently used to produce patient-specific medical implants for clinical translation, to assess how these two different 3D printing modalities affect printing outcomes. The same solid and porous constructs were created from the same biomaterial, a blend of 96% poly-ε-caprolactone (PCL) and 4% hydroxyapatite (HA), using two different 3D printing modalities. Constructs were analyzed to assess their printing characteristics, including morphological, mechanical, and biological properties. We also performed an in vitro accelerated degradation study to compare…

The use of 3D printing technology has advanced the bone tissue engineering, and constructing large artificial bones for repairing large-scale bone defects is highly significant. This study aimed to construct large artificial bones in a precise and controllable manner, focusing on repairing critical-sized bone defects. The researchers used 3D printing technology to synthesize 3D PCL/β-TCP, and then evaluated its ability to promote MC3T3-E1 cell adhesion, proliferation, and new bone formation through a series of characterizations. The results confirmed that 3D PCL/β-TCP, presented as a lattice structure similar to natural bone, could be used to prepare personalized artificial bone blocks based…

Hybrid bioprinting uses sequential printing of melt-extruded biodegradable thermoplastic polymer and cell-encapsulated bioink in a predesigned manner using high- and low-temperature print heads for the fabrication of robust three-dimensional (3D) biological constructs. However, the high-temperature print head and melt-extruded polymer cause irreversible thermal damage to the bioprinted cells, and it affects viability and functionality of 3D bioprinted biological constructs. Thus, there is an urgent need to develop innovative approaches to protect the bioprinted cells, coming into contact or at close proximities to the melt-extruded thermoplastic polymer and the high-temperature print head during hybrid bioprinting. Therefore, this study investigated the potential…

Myocardial cardiopathy is one of the highest disease burdens worldwide. The damaged myocardium has little intrinsic repair ability, and as a result, the distorted muscle loses strength for contraction, producing arrhythmias and fainting, and entails a high risk of sudden death. Permanent implantable conductive hydrogels that can restore contraction strength and conductivity appear to be promising candidates for myocardium functional recovery. In this work, we present a printable cardiac hydrogel that can exert functional effects on networks of cardiac myocytes. The hydrogel matrix was designed from poly(vinyl alcohol) (PVA) dynamically cross-linked with gallic acid (GA) and the conductive polymer poly(3,4-ethylenedioxythiophene)…

Background: This case report demonstrates the effective clinical application of a 3D-printed, patient-specific polycaprolactone (PCL) resorbable scaffold for staged alveolar bone augmentation. Objective: To evaluate the effectiveness of a 3D-printed PCL scaffold in facilitating alveolar bone regeneration and subsequent dental implant placement. Materials and Methods: A 46-year-old man with a missing tooth (11) underwent staged alveolar bone augmentation using a patient-specific PCL scaffold. Volumetric bone gain and implant stability were assessed. Histological analysis was conducted to evaluate new bone formation and graft integration. Results: The novel approach resulted in a volumetric bone gain of 364.69 ± 2.53 mm3, sufficient to reconstruct the original…

Skin tissue engineering faces challenges due to the absence of vascular architecture, impeding the development of permanent skin replacements. To address this, a heparin-functionalized 3D-printed bioink (GH/HepMA) was formulated to enable sustained delivery of vascular endothelial growth factor (VEGF), comprising 0.3 % (w/v) hyaluronic acid (HA), 10 % (w/v) gelatin methacrylate (GelMA), and 0.5 % (w/v) heparin methacrylate (HepMA). The bioink was then used to print dermal constructs with angiogenic functions, including fibroblast networks and human umbilical vein endothelial cell (HUVEC) networks. GH/HepMA, with its covalently cross-linked structure, exhibits enhanced mechanical properties and heparin stability, allowing for a 21-day sustained…

Three-dimensional (3D) structures are actually the state-of-the-art technique to create porous scaffolds for tissue engineering. Since regeneration in cartilage tissue is limited due to intrinsic cellular properties this study aims to develop and characterize three-dimensional porous scaffolds of poly (L-co-D, L lactide-co-trimethylene carbonate), PLDLA-TMC, obtained by 3D fiber deposition technique. The PLDLA-TMC terpolymer scaffolds (70:30), were obtained and characterized by scanning electron microscopy, gel permeation chromatography, differential scanning calorimetry, thermal gravimetric analysis, compression mechanical testing and study on in vitro degradation, which showed its amorphous characteristics, cylindrical geometry, and interconnected pores. The in vitro degradation study showed significant loss of…

For treating idiopathic sudden sensorineural hearing loss, prednisolone is commonly used. However, systemic or middle ear injections often lead to insufficient drug delivery to the inner ear, causing ineffective treatment and systemic side effects. An implant inserted into the middle ear and delivering the drug directly to the inner ear offers a promising solution, providing controlled, long-term drug release with potentially better efficacy and fewer side effects. Individualized implants made of prednisolone-containing silicone can optimize inner ear treatment by fitting the patient’s middle ear anatomy. To gauge the properties of prednisolone-21-hydrogen succinate containing silicone, samples with different geometries and drug…

Polymeric biodegradable microspheres are readily utilized to support targeted drug delivery for various diseases clinically. 3D printed tissue engineering scaffolds from polymer filaments with embedded microspheres or nanoparticles, as well as bulk microsphere scaffolds, have been investigated for regenerative medicine and tissue engineering. However, 3D printed scaffolds consisting only of a homogenous microsphere size with an optimized architecture that includes a unique micro- and macroporosity, have been challenging to produce and hence, have not been assessed in the literature yet. Utilizing our recently established 3D-MultiCompositional Microsphere-Adaptive Printing (3D-McMap) method, the present study evaluated the effectiveness of 3D-printed poly (lactic-co-glycolic acid)…

Inks containing sub-20 µm particles of doped bismuth telluride (n-type Bi2Te2.73Se0.3 or p-type (Bi0.5Sb1.5)Te3) are extruded into 330 µm diameter filaments. When solid-state sintered up to 857 K under no pressure, the filaments only partially densify, with over 20% porosity remaining. Coating the filament with TeO2 powder, followed by hydrogen reduction to liquid Te, enables liquid phase sintering at 710 K, with rapid densification to less than 5% porosity within 1 h. Coating with a stoichiometric blend of Bi2O3 + 3TeO2 powders, followed by hydrogen reduction to liquid Bi and Te, provides transient liquid phase sintering at 808 K and subsequent reaction to Bi2Te3, resulting in fast filament densification,…